Contact Veenschoten and Company for more information on Fireye Scanners and Controls, and local application support.


FLAME SAFEGUARD CONTROLS:



BurnerLogix ‘Y’ Flame Safeguard

Fireye® BurnerLogix™ YB Primary Safety Controls provide full function to basic control for all your application needs.

Built in techniques and algorithms allow the BurnerLogix to learn the characteristics of the fuel being burned and set its internal thresholds to optimize detection under all conditions. An adaptive IR system reacts to properly, and safely shuts down the burner. ‘Revert-to-pilot’ feature can increase a burner’s turndown capability.

With keypad selectable parameters, most applications requirements are easily solved with one programmer module type, resulting in lower spare parts inventory. A pigtail wiring base saves time and labor, making upgrading existing installations easy and quick.


Read More


BurnerLogix ‘Z’ Flame Safeguard

The Fireye® BurnerLogix™ ZB Control expands on the standard BurnerLogix Y System by combining boiler control functions with the same burner management control found in the Y system.

The BurnerLogix ZB110 System provides proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas, and combination fuel burners.

Main Features:

  • Operating Control Function for automatic sequencing of the boiler system
  • Full Modulation Control of fuel and combustion air through the firing rate motor to meet system demand.
  • Solid State Sensors to monitor steam pressure, water temperature, stack temperature, boiler water temperature, or outdoor air temperature.
  • High Pressure and Temperature Alarm Limits
  • Cold Start Thermal Shock Protection
  • User-friendly keypad display system

Read More


BurnerPRO Flame Safeguard

The Fireye® BurnerPRO™ provides proper burner sequencing, ignition and continuous flame monitoring for commercial heating and process equipment firing oil and gas fuels.

BurnerPRO Flame Safeguard (BP110UVF/BP230UVF) Control, with integrated flame safeguard and boiler control operation provides simplified operation for single point applications.

The system is designed for use in non-permanent operations that requires burner recycle at least once every 24 hours. Seven SMART LEDs provide current operating status and lockout information in the event of a safety shutdown


Read More


BurnerPRO Replacement Flame Safeguard

The Fireye® BurnerPRO™ provides proper burner sequencing, ignition and continuous flame monitoring for commercial heating and process equipment firing oil and gas fuels.

BurnerPRO BP110UV-S1, S2, S3 and BP230UV-S1, S2, S3 controls are plug and play compatible with select Siemens LFL control models. Use existing wiring base with no external wiring changes. The controls are also compatible with Satronic TMG controls with minor wiring changes.

The system is designed for use in non-permanent operations that requires burner recycle at least once every 24 hours. Seven SMART LEDs provide current operating status and lockout information in the event of a safety shutdown.




MicroM Series, MEC120 Flame Safeguard

The Fireye® MicroM Series Flame Safeguard Control is a compact, microprocessor based, modular burner management system designed to provide automatic ignition and continuous flame monitoring for commercial heating and process equipment.

The MicroM, using micro-controller technology, incorporates smart diagnostic LED’s, smart reset function for multi-burner applications, optional alpha-numeric display output (ED510), and serial communications via a Modbus or E500 Communication Interface.


Read More


Flame-Monitor E110 Flame Safeguard

The Fireye® Flame-Monitor™ Flame Safeguard Series provides the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas and combination fuel burners.

In conjunction with limit and operating controls, the Flame-Monitor E110 programs the burner/blower motor, ignition and fuel valves to provide for proper and safe burner operation. The control also provides current operating status and lockout information in the event of a safety shutdown.

Main Features:

  • A non-volatile memory to remember its history and present position even when power is interrupted.
  • A constant flame signal read-out via display module
  • Read-out of main fuel operational hours and complete cycles via display module.
  • Modbus communications via RS485 multi-drop link.
  • Dipswitches located on the EP programmer to allow selectable purge time.
  • A run/check switch which allows the operator to stop the program sequence

Read More

Birmingham AL

Headquarters

Serving Southern Power, Pulp/Paper & Process Industries Since 1953
205-685-9830

www.veenschoten.com

sales@veenschoten.com

LOCATIONS

We Are Everywhere


Alabama, Georgia, Mississippi and Northwest Florida Panhandle




GET IN TOUCH

Follow Our Activity

Interactively coordinate proactive e-commerce via process-centric “outside the box“ thinking.


WP Feedback

Dive straight into the feedback!
Login below and you can start commenting using your own user instantly